Manage a PBX Equipment Associated to a Company

This article is intended for resellers who wish to manage a PBX (OXO Connect, OXO Connect Evolution, and OmniPCX Enterprise) associated to their customer companies, for example:

• Update PBX data
• Reset the PBX connection with Rainbow: This disconnects the PBX from Rainbow, and generates a new activation code. This new activation code will have to be entered on PBX side to connect to Rainbow again
• Delete the PBX from the customer company

Updating PBX data

1. From the Rainbow administration interface, click on Customer companies at the bottom of the left panel.
2. In the customer list, click on the name of the customer company associated to the target PBX.
3. In the left panel, click on Communication.
4. In the right part of the window, click on the Comm. Servers tab.
5. Click on the target PBX, and perform any of the following:
   1. Rename your PBX (Information tab)
   2. Activate/Deactivate WebRTC gateway (Information tab)
   3. Change dialing information (Information tab)
   4. Configure the connection to the external WebRTC gateway (Settings tab):
      Internal: The WebRTC gateway embedded in the PBX will be used for Rainbow VoIP call handling (only available for OXO Connect Evolution).
      External: An external WebRTC gateway will be used for Rainbow VoIP call handling.
      If External is selected, you can modify its default IP address and the number of allocated voice channels.

      Note: This option is displayed only when the WebRTC gateway has been activated in the Information tab.

   5. Configure the numbering rules applying to outgoing communications from Rainbow (Telephony tab)
6. Click on Apply.

Resetting the PBX connection with Rainbow

1. From the Rainbow administration interface, click on Customer companies at the bottom of the left panel.
2. In the customer list, click on the name of the customer company associated to the PBX.
3. In the left panel, click on Communication.
4. In the right part of the window, click on the Comm. Servers tab.
5. Click on the target PBX, and select the Connection tab.
6. Click on Reset connection.
   A warning message is displayed at the top of the window.
7. Click Yes to confirm reset.

After reset, the PBX is no more connected to Rainbow, and its status changes to Pending in the Comm. Servers tab.

Deleting a PBX

1. From the Rainbow administration interface, click on Customer companies at the bottom of the left panel.
2. In the customer list, click on the name of the customer company associated to the target PBX.
3. In the left panel, click on Communication.
4. In the right part of the window, click on the Comm. Servers tab.
5. Reset first the PBX connection with Rainbow:
   1. Click on the target PBX, and select the Connection tab.
   2. Click on Reset connection, and click Yes to confirm reset.
6. After reset, move your mouse over the target PBX, click on , and select Remove an equipment.
7. Click on Remove.
   

   The PBX is deleted from the equipment list (Comm. servers tab).