webRTC upgrade document
Respondidahi Team ,
the WebRTC upgrade document says
"First you must copy the new version into the folder upgrade located under the root directory of the WebRTC gateway."
is this /root/upgrade/ directory ? the same is NOT accessible via the normal login (non-root).
there is another directory /home/rainbow/upgrade/ which is accessible with non-root login, need to confirm whether the directory referred to as upgrade located under root is this ? or do we need the root login to upgrade the webRTC.
thanks in advance for your reply.
./regards
Fegy Simon
-
hi team ,
just to confirm the WebRTC upgrade procedure on the ESXi.
the following files are available in the webRTC software package.
rainbow-webrtc-gateway-1.74.16-279.iso >> hardware machine
rainbow-webrtc-gateway-1.74.16-279.iso.md5 >> Hardware machine
rainbow-webrtc-gateway-1.74.16-279.mf >> new installation on ESXI
rainbow-webrtc-gateway-1.74.16-279.ovf >> new installation on ESXI
rainbow-webrtc-gateway-1.74.16-279.vmdk >> new installation on ESXIfor the upgrade of the webRTC on an ESXi machine is there any separate steps
referring to the below readme.txt
the .ISO and .md5 file to be uploaded to the /home/rainbow/upgrade/ directory for the upgrade on ESXi.
The vmdk,ovf and mf files shall be used for a new installation.
./regards
Fegy Simon
Readme file contents below.
Rainbow WebRTC Gateway version 1.74.16-279 delivery
For deployment on ESXi or vCenter just upload file:
ovf/rainbow-webrtc-gateway-1.74.16-279.ovf
For deployment on hardware machine, use Rufus to create USB key with iso:
ovf/rainbow-webrtc-gateway-1.74.16-279.iso
Checksum file of the iso file:
ovf/rainbow-webrtc-gateway-1.74.16-279.iso.md5
For upgrade, upload the files
ovf/rainbow-webrtc-gateway-1.74.16-279.iso
ovf/rainbow-webrtc-gateway-1.74.16-279.iso.md5
to the /upgrade directory using filezilla/scp/Winscp with ssh activated,
then use the mpupgrade command.
For details on mpugrade options, use the mphelp command.
Por favor, entrar para comentar.
Comentários
3 comentários